Corvette V8-7.0L (2007)
16. Remove the right side gears (1), side gear washers (2), and output shaft and gear (3) from the right differential case.
17. Remove the output shaft retaining ring (4) and output shaft (6) from the right output side gear (5), if equipped.
Important: Friction discs and separator plates develop specific wear patterns and are a matched set. During disc and plate removal, the
components must be retained in the specific order in which they were removed.
18. Remove the right clutch pack from the right case.
*
Remove the bellville washer (1).
*
Remove the friction discs (2).
*
Remove the separator plates (3).
19. Tag the clutch pack to indicate the position of the components.
