Corvette V8-7.0L (2007)
24. Remove the rear transverse spring.
25. Support the lower control arm with a straight jack.
26. Disconnect the outer tie rod end from the suspension knuckle.
27. Remove the shock absorber lower mounting bolt and nut.
28. Disconnect the lower ball joint from the suspension knuckle.
29. Remove the straight jack from the control arm.
30. Repeat steps 25 through 29 for the other side of the vehicle.
31. Assemble the J 42055.
32. Install the J 42055 to a transmission jack.
33. Position and firmly secure the J 42055 with the transmission jack to the transmission.
34. Disconnect the wiring harness and brake pipe clip retainers from the rear suspension crossmember.
35. Remove the transaxle mount (2) to rear crossmember nuts (3).
