Corvette V8-7.0L (2007)
73. Align the shift control boot to the I/P accessory trim plate opening, then press to lock the boot retaining tabs.
74. Adjust the shape of the boot for appearance, if necessary.
75. Screw the shift control knob onto the shift control lever until the knob bottoms out.
76. Unscrew the shift control knob just enough to align the retainer slot with the slot on the shift control lever.
77. Install the shift control knob retainer (1) into the slots and seat fully.
78. Install the shift control knob button.
79. Install the console.
80. Connect the negative battery cable.
Tighten the negative battery cable bolt to 15 N.m (11 lb ft).
81. Program the transmitters. Refer to Transmitter Programming (Domestic and Japan) Transmitter Programming (Export - Including Canada).
82. Bleed the clutch hydraulic system.
