Corvette V8-7.0L (2007)
*
Worn splines (3)
*
Worn or scored surface (4)
*
Worn or damaged bushing
5. Inspect the couplings for the following conditions:
*
Loose or damaged inserts (1)
*
Worn, cracking, or deteriorated rubber (2)
MINOR cracking of the rubber is normal and acceptable. If the cracks expose any frayed fabric or internal windings, replace the coupling.
6. Inspect the propeller shaft for the following conditions:
*
Damaged bolt hole threads (1)
*
Loose or missing balance weights (2)
Balance weights may have been installed and removed during the balancing process. In those cases, a weld mark will remain on the propeller
tube.
Inspect the inside of the driveline support tube for a missing balance weight.
*
Loose or damaged snubber (3) - manual transmission
*
Dented or damaged propeller shaft tube (4)
*
Worn, bent, loose, or damaged pins (5)
7. Inspect the propeller shaft pins for proper installation. The pin should extend beyond the flange 30 mm (1.18 in).
