Corvette V8-7.0L (2007)
3. Apply threadlock to the threads of the flywheel bolts. Refer to Sealers, Adhesives, and Lubricants for the correct part number.
Notice: Refer to Fastener Notice.
4. Install the engine flywheel bolts until snug.
1. Tighten the engine flywheel bolts a first pass in sequence to 20 N.m (15 lb ft).
2. Tighten the engine flywheel bolts a second pass in sequence to 50 N.m (37 lb ft).
3. Tighten the engine flywheel bolts a final pass in sequence to 100 N.m (74 lb ft).
5. Install the driveline support, if equipped with a automatic transmission.
6. Install the clutch assembly, if equipped with a manual transmission.
7. Install the catalytic converters.