Corvette V8-7.0L (2007)
Notice: Refer to Fastener Notice.
2. Install the shift control closeout boot retaining nuts.
Tighten the shift control closeout boot retaining nuts to 12 N.m (106 lb in).
3. Install the I/P accessory trim plate.
4. Install the shift control boot over the shift control lever.
5. Align the shift control boot to the I/P accessory trim plate opening, then press to lock the boot retaining tabs.
6. Adjust the shape of the boot for appearance, if necessary.
7. Install the shift control knob.
8. Install the console.
