Corvette V8-7.0L (2007)
8. Install the engine mount.
Notice: Refer to Fastener Notice.
9. Install the front transmission oil cooler line bolts.
Tighten the bolts to 12 N.m (106 lb in).
10. Inspect the transmission fluid level, add if necessary.
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Replacement
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Replacement
Tools Required
*
J 41623-B Cooler Quick Connect Tool
*
DT-47624 Transmission Cooler Line Release Tool
*
DT-47731 1/2 Inch Quick Connect Release Tool
Removal Procedure
1. Install the J 41623-B, or the DT-47731 or the DT-47624 onto the transmission oil cooler (TOC) pipe.
