Corvette V8-7.0L (2007)
Shift Solenoid: Service and Repair
Gear Select/Skip Shift Solenoid Replacement
Gear Select/Skip Shift Solenoid Replacement
Tools Required
J 41099 Gear Select/Reverse Lockout Solenoid Socket
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the gear select solenoid electrical connector.
3. Using the J 41099, remove the gear select solenoid.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Using the J 41099, install the gear select (skip shift) solenoid.
Tighten the gear select solenoid to 40 N.m (30 lb ft).