Corvette V8-7.0L (2007)
12. Remove the windshield side garnish moldings and retainer clips from the windshield frame
13. Remove the 4 rearmost screws that attach the top of the fender to the wheelhouse.
Important: Tape or otherwise protect the fender from the cutting tool.
14. Reposition the top of the fender for tool access.
Important: Keep the cutting edge of the tool against the window.
15. This will allow the urethane adhesive to be separated from the window.
* Leave a base of urethane on the pinchweld flange.
* The only suitable lubrication is clear water.
* Use J 24402-A, J 39032 or equivalent in order to remove the window.
16. Remove the bottom of the window from the urethane adhesive using a long utility knife or similar tool. Keep the cutting edge of the utility knife
against the glass. Do this from inside the vehicle.