Corvette V8-7.0L VIN E (2006)
^
Carefully observe the following:
^
Be sure to place a block or pad between the jack stand support pads and the vehicle.
^
Make sure the jack stand support pads span at least 2 suspension crossmember ribs (1).
^
Support only in the areas shown.
Position the jack stand support pads as follows:
^
Spanning the 2 suspension crossmember ribs (1).
Under the Rear Suspension Crossmember
Important:
^
The jack stand lift pads must not come in contact with the rear suspension monoleaf spring.
^
Carefully observe the following:
^
Be sure to place a block or pad between the jack stand lift pads and the vehicle.
^
Make sure the jack stand lift pads span at least 2 suspension crossmember ribs (1).
^
Support only in the areas shown.
Position the jack stand support pads as follows:
^
Spanning the 2 suspension crossmember ribs (1).
