chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Relays and Modules - Powertrain Management > < Instrument Panel Electrical Center or Junction Block Replacement|Page 828

Corvette V8-7.0L VIN E (2006)

Page 2
background image

4. Turn the electrical center right side up.
5. Connect the electrical cable retainers at the rear of the junction block.

6. Install the junction block cover.
7. Install the positive battery cable lead to the junction block stud. Install the positive battery cable lead nut.

Tighten the positive battery cable lead nut to 10 N.m (89 lb in).

8. Connect the negative battery cable.

Relays and Modules - Powertrain Management > < Instrument Panel Electrical Center or Junction Block Replacement|Page 828