Corvette V8-7.0L VIN E (2006)
4. Loosely install the side reveal molding screws.
5. Tighten the screws in sequence (1-6), starting in the center as illustrated.
Tighten the side reveal molding screws to 2.5 N.m (22 lb in).
6. Apply sealant, install the weatherstrip retainer, the blow out clip, and the weatherstrip. Refer to Weatherstrip Side Retainer Replacement (Coupe
and Convertible) Weatherstrip Side Retainer Replacement (Hardtop).
Windshield Reveal Molding Replacement
Windshield Reveal Molding Replacement
The windshield reveal molding is an applied molding design separate from the window. The reveal molding is bonded by to the windshield and may be
bonded to the body. The reveal molding may be replaced with the windshield as an assembly, or the reveal molding may be available as a separate
service part. Refer to Urethane Adhesive Installation of Stationary Windows.
