Cruze L4-1.4L Turbo (2011)
23. Remove the oil cooler (1) in compound with the oil cooler gasket (2) and the seal ring (3).
24. Remove the oil pressure indicator switch from the oil cooler.
Installation Procedure
1. Install the oil pressure indicator switch to the oil cooler. Use a NEW seal ring.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Tighten the oil pressure indicator switch to 20 Nm (15 lb ft).
3. Clean the sealing surfaces.
4. Install the oil cooler (1) in compound with a NEW oil cooler gasket (2) and a NEW seal ring (3).
5. Lower vehicle.