Cruze L4-1.4L Turbo (2011)
Battery Current Sensor: Service and Repair
Battery Current Sensor Replacement
Removal Procedure
1. Open the hood.
2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery/Battery
Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
3. Remove the battery ground cable nut (1).
4. Remove the battery negative cable (2).
5. Disconnect the wiring harness current sensor plug (4).
6. Remove the current sensor (5) from the battery tray.
