Equinox AWD V6-3.4L (2008)
Cruise Control Switch: Service and Repair
Cruise Control Release Switch Replacement
Removal Procedure
1. Remove the instrument panel left lower closeout panel.
2. Remove the knee bolster.
3. Disconnect the cruise brake switch connector.
4. Rotate the cruise brake switch counterclockwise and remove the cruise brake switch from the switch retainer.
Important: Depressing the brake pedal will allow easier access of the retainer locking tabs.
5. Gently compress the locking tabs on the cruise brake retainer and remove the switch retainer from the brake pedal assembly.
Installation Procedure
Important: Ensure that the indexing arrow is facing to the right and the ears on the retainer are fully extended on the back side of the
bracket to prevent the retainer from being pushed out.
