Equinox AWD V6-3.4L (2008)
Engine Accessory Bracket: Service and Repair
Engine Lift Bracket Replacement
Removal Procedure
1. Remove the thermostat housing. Refer to Engine Coolant Thermostat Replacement (RPO LNJ) (See: Cooling System/Thermostat/Service and
Repair)Engine Coolant Thermostat Replacement (RPO LY7) (See: Cooling System/Thermostat/Service and Repair) .
2. Remove the engine lift bracket bolts.
3. Remove the engine lift bracket from the left cylinder head.
Installation Procedure
1. Install the engine lift bracket to the left cylinder head.
Notice: Refer to Fastener Notice .
2. Install the engine lift bracket bolts.
Tighten the bolt to 50 N.m (37 lb ft).
3. Install the thermostat housing. Refer to Engine Coolant Thermostat Replacement (RPO LNJ) (See: Cooling System/Thermostat/Service and
Repair)Engine Coolant Thermostat Replacement (RPO LY7) (See: Cooling System/Thermostat/Service and Repair) .