Equinox AWD V6-3.4L (2008)
Intake Manifold: Service and Repair
Upper Intake Manifold Replacement
Upper Intake Manifold Replacement
Removal Procedure
1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Removal and Replacement/Fuel Injector Sight Shield Replacement) .
2. Release the clamp (1) from the brake booster vacuum hose connection.
3. Disconnect the brake booster vacuum hose (2) from the intake manifold.
4. Disconnect the left side spark plug wires (1) from the retainers (2) and from the spark plugs. Refer to Spark Plug Wire Replacement .
5. Remove the ignition control module bracket from the engine with the ignition control module and spark plug wires still attached. Position out of
the way. Refer to Ignition Control Module Bracket Replacement .
6. Remove the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .