Equinox AWD V6-3.4L (2008)
Installation Procedure
1. Install the mode cam levers (3) to the evaporator case assembly.
2. Align and install the mode cam (2) to the mode cam levers (3). Rotate the mode cam (2) to verify mode door operation.
3. Install the mode cam bracket (1) to the evaporator case assembly.
Notice: Refer to Fastener Notice.
4. Install the mode cam bracket screws to the evaporator case assembly.
Tighten the screws to 1.5 N.m (13 lb in).
5. Install the mode actuator to the evaporator case assembly.
6. Install the mode actuator screws to the evaporator case assembly.
Tighten the screws to 1.5 N.m (13 lb in).