chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Campaign - A/C Condenser Shield Removal|Page 13588 > < Campaign - A/C Condenser Shield Removal
Page 2
background image

3.

There are six tabs (1) securing the shield to the HVAC condenser. Refer to the illustration.

Notice:

To avoid damaging the HVAC condenser, do NOT use a screw driver, pry bar, or equivalent to remove the shield.

4.

Remove the center two shield tabs (2) first by inserting your hands between the HVAC condenser and the shield. Gently pry the shield away from
the HVAC condenser until the top and bottom center tabs release from the condenser.

5.

Remove the two tabs (3) located on the passenger's side of the shield.

6.

Remove the two tabs (3) located on the driver's side of the shield.

7.

Lower the vehicle.

Courtesy Transportation - For US and Canada

The General Motors Courtesy Transportation program is intended to minimize customer inconvenience when a vehicle requires a repair that is covered
by the New Vehicle Limited Warranties. The availability of courtesy transportation to customers whose vehicles are within the warranty coverage period
and involved in a product program is very important in maintaining customer satisfaction. Dealers are to ensure that these customers understand that
shuttle service or some other form of courtesy transportation is available and will be provided at no charge. Dealers should refer to the General Motors
Service Policies and Procedures Manual for Courtesy Transportation guidelines.

Claim Information

Customer Notification - For US and Canada

General Motors will notify customers of this program on their vehicle (see copy of customer letter shown in this bulletin).

Customer Notification - For Export

Campaign - A/C Condenser Shield Removal|Page 13588 > < Campaign - A/C Condenser Shield Removal