Equinox AWD V6-3.4L (2008)
9. Remove the protective cap from the TXV, the liquid line, and the evaporator outlet hose.
10. Install new seal washers to the liquid line and the evaporator outlet hose.
11. Install the liquid line and the evaporator outlet hose to the TXV.
12. Install the liquid line and evaporator outlet hose retainer plate nut to the TXV.
Tighten the nut to 20 N.m (15 lb ft).
13. Install the four battery box bolts to the inside of the battery box.
Tighten the nut to 15 N.m (11 lb ft).
14. Install the battery box bolt to the outside of the battery box.
Tighten the nut to 10 N.m (86 lb in).
15. Install the battery.
