Equinox AWD V6-3.4L (2008)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine
Evaporative Emission Hoses/Pipes Replacement - Engine
Removal Procedure
1. Remove the nuts (1) securing the evaporative emission (EVAP) hose/pipe (2) to the strut tower.
2. Disconnect the EVAP purge hose/pipe (2) from the purge solenoid.
3. Disconnect the engine EVAP purge hose/pipe from the chassis EVAP purge hose/pipe.
4. Cap or plug both the engine and chassis EVAP purge hose/pipes to prevent contamination.