Equinox AWD V6-3.4L (2008)
8. Disconnect the engine compartment fuel hose/pipe (1) from the fuel rail (4).
9. Cap the fuel hose/pipes to prevent contamination and fuel leakage.
10. Remove the fuel hose/pipe from the fuel pipe retainer (2).
Installation Procedure
1. Position the fuel hose/pipe to the engine.
2. Install the fuel hose/pipe retainers to the threaded studs on the engine and transaxle.
Notice: Refer to Fastener Notice.
3. Install the 2 nuts securing the fuel hose/pipe to the engine and transaxle.
Tighten the nuts to 28 N.m (21 lb ft).
