Equinox AWD V6-3.4L (2008)
1. Install the positive battery cable to the wire loom and re-tape the loom.
2. Install the battery cable retainer (4) to the transaxle selector cable bracket.
3. Install the positive battery cable lead (2) to the starter solenoid.
Notice: Refer to Fastener Notice.
4. Install the positive battery cable terminal to starter solenoid nut (1).
Tighten the nut to 10 N.m (89 lb in).
5. Lower the vehicle.
6. Connect the positive and negative battery cable clip (3) to the battery tray support bracket.
7. Connect the positive and negative battery cable clip to the side of the battery tray support bracket.
8. Install the battery box.