Equinox AWD V6-3.4L (2008)
may cause damage to the brake hose and in turn may cause a brake fluid leak.
10. Remove the supporting wire and position the brake caliper and bracket assemblies back onto the knuckles. Refer to Rear Brake Caliper Bracket
Replacement .
11. Install the rear brake hose bracket nut and bolt.
Tighten the rear brake hose bolt and nut to 12 N.m (106 lb in).
12. Position the wiring harness back to the original location, connect the routing clips to the rear support and upper control arms.
Connect the rear wheel speed sensor electrical connectors.
13. Connect the rear park brake cables through the mounting brackets and onto the park brake actuators.
14. Install the rear park brake cable routing bolts to the trailing arms.
Tighten the rear park brake cable routing bolt to 12 N.m (106 lb in).
