Equinox AWD V6-3.4L (2008)
Shift Cable: Service and Repair
6T70/6T75 - Automatic Transmission
Range Selector Lever Cable Replacement
Range Selector Lever Cable Replacement
Removal Procedure
1. Set the parking brake.
2. Ensure that the shift control range select lever is in the park (P) position.
3. Disconnect the shift control cable (1) from the transmission range selector lever.
4. Depress the range selector cable retainer clip tabs (2) and remove the range selector cable from the range selector cable bracket.
5. Remove the shift control lever knob. Refer to Transmission Control Lever Knob Replacement (See: Shifter A/T/Service and Repair/6T70/6T75 -
Automatic Transmission/Transmission Control Lever Knob Replacement) .
6. Remove the center trim bezel. Refer to Instrument Panel Accessory Bezel Replacement .
7. Remove the console trim plate. Refer to Console Trim Plate Replacement .
8. Remove the right side console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side .