Equinox AWD V6-3.4L (2008)
Valve Body: Service and Repair
6T70/6T75 - Automatic Transmission
Control Valve Body Cover Replacement
Control Valve Body Cover Replacement
Removal Procedure
1. Remove the battery tray. Refer to Battery Tray Replacement .
2. Remove the oil cooler inlet and outlet hoses from the retainer on the control valve body cover.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
4. Remove the left engine splash shield. Refer to Engine Splash Shield Replacement .
5. Remove the front transmission mount. Refer to Transmission Front Mount Replacement (See: Transmission Mount/Service and
Repair/6T70/6T75 - Automatic Transmission/Transmission Front Mount Replacement) .
6. Drain the transmission. Refer to Transmission Fluid Replacement (See: Service and Repair/Removal and Replacement) .
