Equinox AWD V6-3.4L VIN F (2006)
Front Door Hinge: Service and Repair
Hinge Replacement - Front Door
Removal Procedure
Caution: In order to prevent SIR deployment, personal injury, or unnecessary SIR system repairs, do not strike the door or the door pillar in the
area of the side impact sensor (SIS). Turn OFF the ignition and remove the key when performing service in the area of the SIS.
1. Remove the front fender. Refer to Fender Replacement - Front (See: Fender/Front Fender/Service and Repair) in Body Front End.
2. Mark around the hinge location with a soft marker for installation alignment purposes.
3. Support the door.
4. With the door fully latched on the striker, remove the hinge to door bolts.
5. Remove the hinge to body bolts and remove the hinges one at a time.
Installation Procedure