Equinox AWD V6-3.4L VIN F (2006)
Rear Door Window Glass Weatherstrip: Service and Repair
Window Weatherstrip Run Channel Assembly Replacement - Rear
Window Weatherstrip Run Channel Assembly Replacement - Rear
Removal Procedure
1. Lower the rear door window.
2. Remove the rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door (See: Rear Door Panel/Service and Repair) .
3. Remove the inner belt seal. Refer to Sealing Strip Replacement - Rear Door Window Belt Inner (See: Sealing Strip Replacement - Rear Door
Window Belt Inner) .
4. Starting at one end, carefully pull the window weatherstrip run channel assembly from the door frame.
Installation Procedure
1. Align the notch in the window weatherstrip seal to the fixed window post and press the weatherstrip onto the window flange.