Equinox AWD V6-3.4L VIN F (2006)
4. For the EQUINOX emblem/nameplate install to the following dimensions:
Important: All dimensions are arc length measurements.
*
Dimension (a) is 11 mm (0.043 in) from the side of the emblem/nameplate to the left edge of the lift gate.
*
Dimension (b) is 160 mm (6.30 in) from the center of the emblem/nameplate to the bottom of the lift gate.
5. For the CHEVROLET emblem/nameplate install to the following dimensions:
Important: All dimensions are arc length measurements.
*
Dimension (a) is 31 mm (1.22 in) from the side of the emblem/nameplate to the right edge of the lift gate.
*
Dimension (b) is 160 mm (6.30 in) from the center of the emblem/nameplate to the bottom of the lift gate.
6. Heat the mounting surface to approximately 27-41°C (80-105°F) using the heat gun, if necessary.
7. Ensure that the temperature of the emblem/nameplate is approximately 29-32°C (85-90°F).
