Equinox AWD V6-3.4L VIN F (2006)
8. Install the front transaxle mount through bolt.
Tighten the bolt to 110 N.m (81 lb ft).
9. Install the rear transaxle mount-to-frame bolts.
Tighten the bolts to 50 N.m (37 lb ft).
10. Install the stabilizer shaft clamp.
Tighten the bolts to 50 N.m (37 lb ft).
11. Tighten the frame-to-body bolts.
Tighten the bolts to 155 N.m (114 lb ft).
12. Install the front air dam fasteners.
13. Install the side splash shield-to-frame fasteners.
14. Install the front wheels. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
15. Lower the vehicle.
16. Unsecure the radiator from the upper radiator support.
17. Align the front suspension. Refer to Front Toe Adjustment .
