Equinox AWD V6-3.4L VIN F (2006)
1. Install the cup holder to the track.
2. Position the track in the console assembly.
3. Install the console track screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screw to 2.5 N.m (22 lb in).
4. Snap the cupholder cover in place.
5. Inspect the cupholder for correct operation.
Cup Holder Replacement - Front Floor Console - Rear
CUP HOLDER REPLACEMENT - FRONT FLOOR CONSOLE - REAR
REMOVAL PROCEDURE
1. Pull all the way out on the cup holder.
2. Remove the screws from the cup holder track.
