chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Procedures|Page 15628 > < Procedures|Page 15626
Page 2
background image

6. Remove the lower portion of the rear drain hoses from the retaining clips.
7. Pull the rear drain hoses up through the side rail.

Installation Procedure

1. Route the rear drain hose down through the access hole in the side rail.

2. Push the end of the rear drain hoses down into the rear compartment opening.
3. Clip the lower portion of the rear drain hoses into position.
4. Install the rear side trim panels. Refer to Garnish Molding Replacement - Center Pillar Upper  (See: Interior Moulding / Trim/Trim Panel/Service

and Repair/Removal and Replacement) in Interior Trim.

5. Clip the upper portion of the rear drain hoses into position.

6. Install the rear drain hoses to the sunroof module.
7. Install the headliner. Refer to Headliner Replacement  (See: Interior Moulding / Trim/Headliner/Service and Repair) in Interior Trim.

Sunroof Drain Hose Replacement

Procedures|Page 15628 > < Procedures|Page 15626