Equinox AWD V6-3.4L VIN F (2006)
1. Install the heater outlet pipe (2) to the engine.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the heater outlet pipe nut (1) securing the heater outlet pipe (2) to the intake manifold.
Tighten the nut to 25 Nm (18 ft. lbs.).
3. Install the heater outlet pipe to the throttle body nuts (3) and bolt (4).
Tighten the nuts and bolt to 10 Nm (89 inch lbs.).
4. Connect the heater core outlet hose to the heater outlet pipe.
5. Position the heater core outlet hose clamp over the heater outlet pipe connection.
