Equinox AWD V6-3.4L VIN F (2006)
Camshaft Bearing: Service and Repair
Camshaft Rear Bearing Hole Plug Replacement
Removal Procedure
1. Remove the engine flywheel.
2. Remove the camshaft rear bearing hole plug.
Installation Procedure
1. Important: Inspect plug bore for old sealant. Ensure bore is clean and free of nicks and burs.
Apply sealer GM P/N 12377901 (Canadian P/N 10953504) or equivalent to the camshaft rear bearing hole plug.
2. Install the camshaft rear bearing hole plug.
3. Ensure that the camshaft rear bearing plug is installed to specifications.
4. Install the engine flywheel.
