Equinox AWD V6-3.4L VIN F (2006)
8. Fully insert the generator attachment bolt most near the intake manifold.
^
Tighten the bolt to 25 Nm (18 ft. lbs.).
9. Install the PCV foul air hose.
10. Install the EGR pipe.
11. Position the heater outlet pipe to the throttle body and the upper intake manifold.
12. Install the heater outlet pipe nuts (2) to the throttle body.
^
Tighten the nut to 10 Nm (89 inch lbs.).
13. Install the heater outlet pipe bolt (3) to the throttle body.
^
Tighten the bolt to 10 Nm (89 inch lbs.).
14. Install the heater outlet pipe nut (4) to the upper intake manifold.
^
Tighten the nut to 25 Nm (18 ft. lbs.).
15. Install the air cleaner intake duct.
16. Install the ignition control module bracket.
