Equinox AWD V6-3.4L VIN F (2006)
19. Remove the engine front cover gasket (1).
20. Clean the engine block and front cover gasket sealing surfaces.
Installation Procedure
1. Apply sealer GM P/N 12346004 (Canadian P/N 10953480) or the equivalent, to the lower tabs of the engine front cover gasket. Uniformly apply
the sealer to both sides of the gasket lower tabs with the sealant bead being no less than 5.0 mm (0.20 inch) wide as shown. Torque front cover
immediately after installation of sealer coated gasket.
2. Install the gasket (1) to the engine block positioning the gasket on the locating pins (2).
