Equinox AWD V6-3.4L VIN F (2006)
4. Assemble the two halves of the blower case assembly.
5. Install the blower case assembly screws.
Tighten the screw to 1.5 N.m (13 lb in).
NOTE: Refer to Fastener Notice.
6. Install the HVAC module front of dash seal.
7. Install new seal washers to the evaporator pipes.
8. Instal the TXV and the backing plate to the evaporator pipes.
9. Install the TXV screws to the backing plate.
Tighten the screws to 3.5 N.m (31 lb in).
10. Install the evaporator case assembly.
11. Install the HVAC module.