Equinox AWD V6-3.4L VIN F (2006)
Heater Hose: Service and Repair
Inlet
HEATER HOSE REPLACEMENT - INLET
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (GE 47716 Fill).
2. Remove the heater inlet hose clamp from the heater core.
3. Remove the heater inlet hose (2) from the heater core.
4. Remove the heater inlet hose clamp from the engine.
5. Remove the heater inlet hose (2) from the engine.
6. Remove the heater inlet hose (2) from the vehicle.
INSTALLATION PROCEDURE
