chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 16280 > < SIR Disabling and Enabling Zones|Page 16278
Page 17
background image

13. Remove the lower center pillar trim.
14. Remove the CPA from the seat belt pretensioner - RF connector.
15. Disconnect the seat belt pretensioner - RF connector from the vehicle harness connector.

16. Remove the CPA from the I/P module connector.
17. Disconnect the I/P module connector from the vehicle harness connector.

18. Remove the CPA from the steering wheel module coil connector.
19. Disconnect the steering wheel module coil connector from the vehicle harness connector.

SIR Disabling and Enabling Zones|Page 16280 > < SIR Disabling and Enabling Zones|Page 16278