Air Bag System Information: SIR Disabling and Enabling Zones
17. Remove the CPA (2) from the SIS - LF connector.
18. Disconnect the SIS - LF (1) from the vehicle harness connector (3).
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. To enable the roof rail module - left, continue to step 3. To enable both the side impact sensor (SIS) - LF and the seat belt pretensioner - LF,
continue to step 9.
3. Connect the roof rail module - left connector to the vehicle harness connector.
4. Install the CPA to the roof rail module - left connector.
5. Install the rear coat hooks.
6. Install the rear headliner push-in retainers.
7. Install both the left and right rear corner garnish moldings.
8. Install the upper rear window molding.
