Equinox AWD V6-3.4L VIN F (2006)
Coolant Line/Hose: Service and Repair
Heater Pipe Replacement - Outlet
Heater Pipe Replacement - Outlet
Removal Procedure
1. Remove the injector sight shield.
2. Drain the cooling system.
3. Remove the air cleaner air intake duct.
4. Remove the manifold absolute pressure (MAP) sensor bolt (3) and bracket (2).
5. Rotate the MAP sensor out of the way of the heater outlet pipe.
6. Disconnect the evaporative emissions (EVAP) pipe from the EVAP canister purge solenoid.
7. Disconnect the electrical connector from the EVAP canister purge solenoid.
8. Disconnect the exhaust gas recirculation (EGR) valve electrical connector.
9. Release and slide the heater outlet hose clamp (1) away from the heater outlet pipe connection.
10. Disconnect the heater outlet hose (2) from the heater outlet pipe.