Equinox AWD V6-3.4L VIN F (2006)
8. Install the bolt to retain the liquid line to the body.
Tighten the nut to 9 N.m (80 lb in).
9. Remove the protective cap from the TXV, the liquid line, and the evaporator outlet hose.
10. Install new seal washers to the liquid line and the evaporator outlet hose.
11. Install the liquid line and the evaporator outlet hose to the TXV.
12. Install the liquid line and evaporator outlet hose retainer plate nut to the TXV.
Tighten the nut to 16 N.m (12 lb ft).
