Equinox AWD V6-3.4L VIN F (2006)
Knee Diverter: Service and Repair
KNEE BOLSTER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the screws from the trim panel.
2. Remove the filler panel by pulling until the trim clips disengage.
3. Remove the trim panel by pulling on the panel.
INSTALLATION PROCEDURE
1. Position the outer trim panel.
2. Push to install the panel.
3. Fasten the screws that hold the left side trim panel to the I/P.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 2.5 N.m (22 lb in).
