Equinox AWD V6-3.4L VIN F (2006)
Turn Signal Switch: Service and Repair
Multifunction, Turn Signal Switch Replacement
Multifunction, Turn Signal Switch Replacement
Removal Procedure
1. Remove the steering column trim covers.
2. Disconnect the multifunction turn signal switch harness connectors.
3. Depress the lock tabs on the left and right multifunction levers.
4. Remove the multifunction levers.
Installation Procedure
1. Install the multifunction turn signal switch to the steering column.
2. Important: Ensure both locking tabs are seated.
Connect the multifunction turn signal switch harness connectors.
3. Install the steering column trim covers.
