Equinox AWD V6-3.4L VIN F (2006)
8. Remove the battery box cover (1).
9. Loosen the battery negative cable terminal bolt.
10. Remove the battery negative cable from the battery.
INSTALLATION PROCEDURE
1. Install the battery negative cable to the battery.
Tighten the battery negative cable terminal bolt to 17 N.m (13 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.
2. Install battery box cover (1).
Tighten the battery box cover screws to 2 N.m (18 lb in).