Equinox AWD V6-3.4L VIN F (2006)
Steering Gear: Service and Repair
Rack and Pinion Boot Replacement - On Vehicle
Rack and Pinion Boot Replacement - On Vehicle
^
Tools Required
-
J 22610 Keystone Clamp Pliers
Removal Procedure
1. Raise and support the vehicle.
2. Remove the tire assembly.
3. Remove the outer tie rod.
4. Remove the jam nut.
5. Remove the spring from the boot, outer end.
6. Cut and remove the crimp clamp, inner end. Discard the clamp.
7. Unseat the boot from the steering gear and remove.