Equinox AWD V6-3.4L VIN F (2006)
1. Install the toe link to the support assembly.
2. Important:
^
Install the bolt with the head towards the front of the vehicle.
^
Position the cam nut in same position as in the upper control arm.
Install the toe link to support nut and bolt.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the toe link to the knuckle.
^
Tighten the bolt to 160 Nm (118 ft. lbs.).
4. Tighten the toe link to support bolt.
Tighten the bolt to 160 Nm (118 ft. lbs.).
5. Lower the vehicle.
6. Check the rear alignment.