chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Fluid Pan, A/T > < A/T - Revised Converter Check Valve/Cooler Line Fitting|Page 9616
Page 3
background image

4. Engage the transaxle oil cooler lines with the fan shroud by snapping in place. 

5. Connect the transaxle oil cooler lines to the radiator. 

^

Tighten the transaxle cooler line fittings to 16 Nm (12 ft. lbs.)

6. Important: Dexron III automatic transmission fluid is not compatible with this transaxle. If Dexron III ATF is used, transaxle failure will result.

This transaxle uses GM T-IV fluid P/N 88900925. 

Add fluid to the transaxle. Refer to the Transmission Fluid Checking Procedure. 

7. Start the engine a check for leaks.

Fluid Pan, A/T > < A/T - Revised Converter Check Valve/Cooler Line Fitting|Page 9616