Equinox AWD V6-3.4L VIN F (2006)
Axle Shaft Assembly: Service and Repair
Wheel Drive Shaft Inner Joint and Seal Replacement - Rear
Wheel Drive Shaft Inner Joint and Seal Replacement - Rear
^
Tools Required
-
J 35910 Drive Axle Seal Clamp Pliers
Disassembly Procedure
1. Position wheel drive shaft bar in a soft jawed vise and clamp securely.
2. Using side cutters, remove and discard the small seal clamp.
3. Remove large seal retaining clamp using a flat-bladed tool and discard the clamp.