Equinox AWD V6-3.4L VIN F (2006)
8. Place a block of wood against the CV joint outer race and carefully tap on the CV joint to remove it from the wheel drive shaft bar.
9. Remove the seal from the wheel drive shaft bar.
10. Remove the CV joint retaining ring from the wheel drive shaft bar.
11. Place a brass drift against the CV joint inner race (1).
12. Tap gently on the brass drift with a hammer in order to tilt the joint race.
13. Remove the first bearing roller (2) when the CV race tilts.
14. Tilt the CV joint inner race in the opposite direction to remove the opposing bearing roller.
